UF1 News

SpeedPassion has dipped into the F1 market with the release of a pair of F1 bodies. Not willing to just produce top-notch F1 lids, they’ve just released information on their new F1 chassis. Notable Features: • Upper and lower pillow ball front suspension • Side link rear suspension • Center …

Yokomo has decided to jump into the ever-growing Formula 1 market. With years of racing experience as well as quite a few World Titles under their belt, I’m sure this new car will be a force to be reckoned with! Features • Double wishbone front suspension with carbon fiber lower …

If you’re not aware of all the drama, the Trinity D3.5 17.5t Brushless Motor has been banned by ROAR. What does this mean to the UF1? Well, in short, we only allow ROAR-approved motors to be used in the UF1 Series. HOWEVER… Since we only run 21.5t motors, the Trinity …

If there’s one thing in RC I love it’s the current trend of scale RC racing. Many cool classes have been springing up all around SoCal including the amazingly fun UF1 Series (scale F1 cars), the VTA (Vintage Trans Am) and the UGT Series (Ultimate Grand Touring). Guys have been …

This is a ready to assemble electric powered R/C model of the Ferrari F2012. The distinctive form of the body, including the complex front and rear wings as well as stepped front section, is accurately reproduced and modelers can choose from two types of side pontoons. All this scale-realism is …

Podium Interviews Drivers: Lee Passehl (1st), Dave Berger (2nd), Chris Cabrales (3rd) Chassis: TOP Rebel ESC: Tekin RS Motor: Schuur Speed 21.5 Battery: Turnigy Shorty Driver: Lee Passehl Q: Congratulations Lee on another fine performance. Even though you took the day’s overall win, a lot of the top drivers are …

Spec class racing is the ultimate battle ground across the country. Novak is pleased to present the latest weapon in the spec racing war— the Ultra Low-Resistance Stator, available in four spec winds: 10.5T (#S6630), 13.5T (#S6633), 17.5T (#S6637) and 21.5T (#S6638). These new stators are developed to provide maximum …

Ok boys and girls…trivia question: Does the UF1 logo look different than normal? Some might say no, not really…and they’d be right. Sort of. While the logo itself stays the same, there has been the addition of an official TM emblem. To help protect the Series and keep it from …

Heavy duty alloy front hub set with oversized bearings for the FGX. Includes larger 10x5x3 (2) and 9x5x3 (2) bearings and are supported by stainless steel crush sleeves that are also included! Also on the hubs are an additional ackerman hole in the outer position. The extra hole setting allows …

IFS Adapter mounting plates for the Exotek EFX chassis set. Works with the Exotek EFX v1 and v2! Simple and lightweight yet heavy duty design. Includes alloy mounting plates for the rockers and dampeners and optional 3Racing sway bars. Part Number: 1281 $18.95 Link: www.exotekracing.com