UF1 News

The UF1 2018/2019 Season is right around the corner, so we created a video with some general info about this year’s UF1 Series. If you’d like to jump right to certain sections, here’s the time marks: Schedule: 13s mark Classes – F1 and F2: 1:12 mark Rules (full rule set …

Every Father’s Day the Concours d’Elegance is held down on Rodeo Drive (in Beverly Hills). Tons of cool cars are parked for all to see; Porsche, Lamborghini, Pagini, Ferrari – you name it, it’s probably there. This little gem caught my eye immediately, RedBull’s RB7. So, of course, I had …

TRG, best known for their TRG117 Formula 1 kit, has released new pix of a possible F1 prototype! This ride seems to rely heavily on under-car aero, using a 3mm 7075-T6 alloy chassis as the base with molded side guards to completely close off the bottom. A standard wing helps …

That’s right – UF1 is back! The series return will feature 7 races starting in September 2018 and ending in April 2019. Here’s the schedule with dates and locations: R1: Sept 16, 2018 TQ RC Racing R2: Oct 14, Cal Raceway R3: Nov 11, TQ RC Racing R4: Jan 13, …

Bob Stellflue, designer of the Team Associated Factory F6 sent over his setup that he used for the 2017 Points Series at TQ Raceway. He said this setup is semi-aggressive but, for the most part, easy to drive, making it a perfect starting spot for new drivers of this F1 …

For the 2018 season, Formula 1 has required teams to add some sort of protection for the drivers while in the cockpit. This form of protection came as the Javelin Halo, and now you can protect your 1:10 driver head with a tiny replica from 3DRC. The Javelin Halo is …

PROTOform has released a new F1 body that is designed to fit most modern F1 chassis. It features a low nose, undercut side pods and a separate, injection-molded driver’s helmet for maximum detail. The airbox is also a separate piece that can be attached with Shoo-Goo or double-sided tape. This …

Fenix has released a new 1:10 scale Formula 1 kit - the Mistral. This car features tons of carbon fiber and shiny aluminum to create a wicked looking machine. Up front, the Mistral uses carbon fiber lower arms that can be tuned to different stiffness levels. All the important tuning options are also there; caster, camber, ride height and toe. Moving to the center of the chassis, the Mistral's 2.5mm

Calling all F1 fanatics, check out the pair of sick looking F1 bodies straight from Protoform’s molding table! Dubbed the F1-Thirteen and F1-Fourteen, these bodies are based on their appropriate-year, full-scale counterparts! The F1-Thirteen is designed to fit most modern F1 chassis equipped with Tamiya’s F2012 Front wing (#51524 / …

Tuning Haus’ now offers an aluminum steering arm kit for Tamiya (and other) F1 cars. Designed for function as well as appeal, this setup features machined aluminum arms (etched with L/R orientation), a lower profile design for additional ride height adjustments and are keyed to steel axle inserts allowing inline …